Danfoss motor valve without actuator ICM 125 DN125 027H7150
More in this category: Main valves/pilot valves
One click to the most important information:
Description
ICM valves are designed for regulating expansion processes in fluid lines or for regulating the pressure or temperature in pump return lines, suction lines or pressure lines. ICM valves are designed so that the opening and closing forces are balanced. There are therefore only three sizes of ...
ICM valves are designed for regulating expansion processes in fluid lines or for regulating the pressure or temperature in pump return lines, suction lines or pressure lines. ICM valves are designed so that the opening and closing forces are balanced. There are therefore only three sizes of ICAD actuator needed for the entire ICM series from DN 20 to DN 150. The ICM motor-driven valve and ICAD actuator assemblies come as extremely compact units with small dimensions. ICM valves are direct motor-driven valves driven by a type ICAD actuator.
Features
• Designed for industrial refrigeration applications with a max. operating pressure of 52 bar
• ICM 20-65: Can be used with all conventional refrigerants including R717 and R744 (CO2) as well as non-corrosive gases/liquids
• Direct-coupled connections
• Connectors use welding studs, ...
• Designed for industrial refrigeration applications with a max. operating pressure of 52 bar
• ICM 20-65: Can be used with all conventional refrigerants including R717 and R744 (CO2) as well as non-corrosive gases/liquids
• Direct-coupled connections
• Connectors use welding studs, welding sleeves, soldered and threaded connections
• Housing made from low temperature steel
• Low weight and compact construction
• Control cone with V-connection optimised for precision control, particularly when under partial load
• Cavitation-resistant valve seat on A cones
• Modular concept
• Each valve housing is available with several different types of connector and in different sizes
• The ICM motor-driven valve can be transformed into an ICS servo-valve
• Can be manually opened via ICAD or using a multi-purpose tool
• PTFE seat ensures an excellent valve seal
• Magnetic coupling - fully hermetic encapsulation
Accessories / Replacement parts
-
Actuator
-
Cap
-
Connection cable
-
Connection plug
-
Emergency power supply
-
Magnet
