Alco electronic oil level monitoring OW4-020 TraxOil without adapter 60bar 805116
More in this category: Electronic oil level regulation systems
One click to the most important information:
Description
TraxOil OW4 Oilwatch is an electronic oil level monitoring systems with alarm and compressor shut-off functions. It is particularly suitable for use in refrigerant compressors that do not have an oil pump.
OW4 TraxOil uses a Hall sensor to measure the oil level in the compressor. A magnetic ...
TraxOil OW4 Oilwatch is an electronic oil level monitoring systems with alarm and compressor shut-off functions. It is particularly suitable for use in refrigerant compressors that do not have an oil pump.
OW4 TraxOil uses a Hall sensor to measure the oil level in the compressor. A magnetic float changes its position depending on the oil level and thus also changing the magnetic field. Changes in the magnetic field are detected by the Hall sensor and evaluated by the electronics. Unlike optical systems, foaming oil or light does not affect readings. The current oil level is indicate by 3 LEDs. If the oil level enters the red zone, OW4 TraxOil raises an alarm after a time delay of 20 seconds and switches the changeover contact to alarm status (red LED). This can be used to turn off the compressor. If the oil level rises back into the normal range, the alarm is reset.
Features
- OM4 series for CO2 and R410A
- Cast housing and electrical connection with edge gated connections for protection rating IP65
- Power 24 VAC
- 3-zone oil level indication with Hall sensor for precisely measuring the oil level. No incorrect measurements due to foamed oil or light exposure
- Output relay ...
- OM4 series for CO2 and R410A
- Cast housing and electrical connection with edge gated connections for protection rating IP65
- Power 24 VAC
- 3-zone oil level indication with Hall sensor for precisely measuring the oil level. No incorrect measurements due to foamed oil or light exposure
- Output relay with changeover switch for turning off the compressor or alarm (230 VAC / 3 A)
- Fast and simple installation on existing oil inspection glass sockets without locknut
- Independent regulating device consisting of oil level sensor and solenoid valve for the oil supply
- LEDs for alarm, operating status and 3-zone level detection
- Adapter for connection many different compressor models
Accessories / Replacement parts
-
Adapter set for mounting modulator
-
Connection cable
-
Dichtungs-Set
-
Transformer
