- Products
- Refrigeration components
- Regulators
- Electronic
- Composite controller/power regulator
- Dixell Verbundregler XC650CX-0C05F
Composite controller/power regulator
Dixell Verbundregler XC650CX-0C05F
Icon. Image similar to product.
Order No.: 297.3441
Manufacturer number: XC650CX-0C05F-3.5
Manufacturer: Lumity
To previous product 297.3436
More in this category: Composite controller/power regulator
Loading
One click to the most important information:
Description
The XC600CX family of controllers is designed for simultaneous control of compressors and for both normal and complex rack systems.<br> Staged, screw, Scroll™ or Stream™ compressors can be used.<br> It is also possible to control two suction circuits with a common condenser.<br> The control ...?xml>
The XC600CX family of controllers is designed for simultaneous control of compressors and for both normal and complex rack systems.<br> Staged, screw, Scroll™ or Stream™ compressors can be used.<br> It is also possible to control two suction circuits with a common condenser.<br> The control logic with neutral zone depends on the temperature or pressure in the suction line for the compressor and in the hot gas line for the fans. Using a optimised rotation algorithm, the operating time for different loads can be evenly spread to ensure even wear.<br> Each regulator load has its own isolated protective contact that when activated immediately shuts off the load.<br> Optimum safety for the entire system is also provided by the direct 230 V AC contacts for the high and low pressure switches that can shut off the entire system in an emergency. The displays shows all system information: Temperature or pressure values, operating and maintenance status for each load and active alarms.<br> Depending on the type of refrigerant, the controller can also calculate the temperatures in the suction and hot gas lines from their measured pressures.<br> The HOT KEY memory card allows all parameter settings to be easily saved, downloaded and transferred between devices.<br> The device features a serial communication interface using the standard Modbus protocol. This allows a connection to a building utilities or monitoring system (e.g.: Dixell Xweb500) to be easily set up.
Accessories / Replacement parts
-
Cable set
-
Interface adapter
-
Pressure transmitter
-
Programming key
-
Transformer
Technical data
Dimensions
Cutout for panel mounting
29 x 71 mm
Width
74 mm
Height
32 mm
Depth
60 mm
General information
Resolution
0,1 °C
0.1 bar
Type
Verbundregler/Leistungsregler
Buzzer
NEIN
Housing
selbstverlöschender Kunststoff
Communication protocol
ModBus-RTU
Mounting type
Fronttafeleinbaugerät
Interface
RS485
Safety class software
A
Storage space
EEPROM
for refrigerants
R22
R32
R134A
R290
R404A
R407A
R407C
R407F
R410
R448A
R449A
R450A
R452A
R507
R513
R1234ze
R744
R515B
R454A
R454B
R454C
R455A
R1234YF
Connections
Connection
Kabelsätze mit Stecker
Serial interface
TTL
Electrical Data
Output analog
0 to 10 V
Input
Analog
0.5 to 4.5 Vdc
Digital
7x potential free
Power consumption
5 VA
Relay outputs
Resisitive 3A
120/240 Vac;
Motor 1/10 Hp
120 Vac;
1/4 Hp
240 Vac;
Pilot Duty B300
Protection class
IP20 | IP65
front protection class: IP65
Supply voltage
230/1/50 V/Ph/Hz
24 V AC/DC
Humidity
Ambient humidity
20 bis 85 %
without condensation
Temperature data
Storage temperature
-25 bis 60 °C
Temperature range
NTC sensor
-40 bis 110 °C
Temperature measuring range
max.
60 °C
min.
-10 °C
Temperaturmessung
Genauigkeit
±0,7 °C
at 25°C; ± 1 digit
Detaillierte technische Daten finden Sie in der Bedienungsanleitung in der Rubrik Downloads!
Technical modifications reserved. Product images may differ from the actual product and are meant for demonstration purposes only. Absolutely no liability can be assumed for possible indication errors and errors in the manufacturers’ information.
Customers also bought...
Loading
Loading