Microprocessor for remote monitoring SSMRG V.2 (4 inputs / 4 outputs, 2 analog)

GSM remote monitoring device for 4 inputs and outputs. The GSM Remote Guard contains a microprocessor based controller with a dual band GSM modem. It monitors electrical devices and sends text alerts to up to 5 telephone numbers. SMS messages can be sent to activate or deactivate specific relays. The state of inputs and outputs can be similarly requested any time from anywhere. Switching on/off can be requested via a data call to a substation (second SSMRG/V.2) without notification being sent to all the other specified telephone numbers. This creates a master-slave control system. Each SSMRG/V.2 controller can be used as a master or slave device, or as a combination of both. This can only be achieved by configuring the parameters. A rechargeable battery is integrated into the device so that an alert can be sent to the stored telephone numbers in the event of a power failure (mains failure). A special feature is the ability to integrate several GSM Remote Guards into a single control system to avoid having to lay long wires. All parameters are transmitted by SMS to the GSM Remote Guard where they are permanently saved. Simple remote monitoring via mobile phone.

System requirements:

• SSMRG/V.2
• Mobile phone
• SIM card for SSMRG/V.2
• This remote monitoring system is used in refrigeration and air conditioning systems, server rooms, IT rooms, heating systems, etc.

No special software is required for configuring the parameters.
All parameters such as telephone numbers, alert messages, threshold values, etc. are sent as SMS messages to mobile phones.

• ALERTING: When an alarm is activated, a short message (SMS) is sent to up to 5 numbers.
• SWITCH ACTIVATION: Switches can be actuated from the outputs of the SSMRG/V.2 by sending an SMS.
• MONITOR: The status of the inputs and outputs can be checked via SMS from anywhere in the world.
• CONTROL: Switching on/off can be requested via a data call to a substation (second SSMRG/V.2) without notification being sent to all the other specified telephone numbers. This creates a master-slave control system. Each SSMRG/V.2 controller can be used as a master or slave device, or as a combination of both. This can only be achieved by configuring the parameters. All electrical devices can be reached from anywhere in the world via the SSMRG/V.2.