Kelvion axial air condenser without motor MSA .03-1x3A

The MS condenser series consists of 12 basic models (3x MSM & 9x MSA). The option to select either a 4 or 6 pin fan unit provides a total of 24 models with a power range of 3.9 to 26.5 kW. Condenser block and ventilation units must be ordered separately.

The feet included in the delivery can be used to set up the MS condenser in a horizontal or vertical position. Wall mounting is also possible. The axial fans from German manufacturers meet the highest demands for quality and performance and have been optimised for use in MS condensers. This means noise emissions from MS condensers are very low.
 

Heat exchanger:
The heat exchanges consists of 8 mm copper pipes with inner ribbing and high-performance aluminium fins with a fin spacing of 2.1 mm.
The distinctive fin flange provides a permanent and effective connection between the flared pipe and the fin. This achieves a highly efficient transfer of heat.

Housing:
The housing is made from Sendzimir galvanised steel with a UV-resistant coating (RAL 9018). This surface coating guarantees excellent resistance to weather and corrosion.
All mounting elements are made from stainless steel.

Axial fans:
Low noise compact unit: Motor with fan blades, protective grille according to DIN 31001/24176, corrosion and weather protection.

Fan: Ø 350 mm, dynamic balancing at grade G 6.3 according to DIN ISO 1940, two speeds available:

• 4-pin: 230 ± 10% V-1 Ph, 50 Hz, IP 44, thermal relays for motor protection, internally wired, ambient motor temperature from -25 °C to +60 °C, 1295 rpm
• 6-pin: 230 ± 10% V-1 Ph, 50/60 Hz, IP 44, thermal relays for motor protection, internally wired, ambient motor temperature from -25 °C to +60 °C, 880 rpm

Variable speed control with phase angle control or voltage reduction.