Heat pumps

Copeland fully hermetic scroll Compressor solder ZH11M*E-TWD-524 400V

Order No.: 103.2087
Manufacturer number: 8546562
Manufacturer: Copeland

More in this category: Heat pumps

Loading

One click to the most important information:

Description

Copeland Scroll™ compressors are already being used by all well-known heat pump manufacturers. Copeland has invested heavily in developing its ZH heat pump scroll compressors and carried out comprehensive testing to optimise them. They can now be used in private and commercial heat pump ...

Copeland Scroll™ compressors are already being used by all well-known heat pump manufacturers. Copeland has invested heavily in developing its ZH heat pump scroll compressors and carried out comprehensive testing to optimise them. They can now be used in private and commercial heat pump applications in new buildings as well as a replacement for conventional heating systems. Produced in Europe for Europe. Copeland serves the European market from its production facilities in Northern Ireland and Belgium. The new ZH scroll compressor is suitable for all heat pump applications, whether space heating or hot water provision for private and commercial purposes, in new installations or as replacements for existing systems. The ZH scroll compressors can also be used in heat pumps that use direct evaporation where the refrigerant is used exclusively for heat transportation.

More heating power
The ZH scroll compressor delivers more power at lower evaporating temperatures (heat source), with the heat requirement being better covered compared with piston compressors. This results in lower energy consumption for an additional heater.

High efficiency
The ZH heat pump scroll compressor has a special scroll design that performs exceptionally well in heat pump applications, particularly where heat source temperatures are low. The ZH scrolls perform better over time, like all Copeland scroll compressors. Most piston compressors, however, tend to perform less well over time.

Higher water temperature in all applications
The ZH scroll compressor has been optimised for applications in new buildings where the requirements for space heating is at most 50 °C.

Quiet operation
The ZH scroll compressor is extremely quiet, which is a specific requirement for heat pumps that are installed indoors.

Durability and reliability
The ZH scroll compressor meets the high standards of durability and reliability, just like all other Copeland scroll compressors. These include the ability to let in comparatively large amounts of fluid in a short period of time. Such actions are known to damage and even destroy the mechanical parts of piston compressors. Fewer moving parts, a robust drive mechanism and low vibrations due to the continuous seal all make the ZH scroll compressor predestined to become the most popular solution in the heat pump market.

Lubrication
Ester oil, factory filled: Emkarate RL 32 3MAF (531.2827, 1 litre can)

show more


Features

Mehr Wärmeleistung
Der ZH Scroll-Verdichter liefert eine höhere Leistung bei niedrigen Verdampfungstemperaturen (Wärmequelle), wodurch der Wärmebedarf im Vergleich zu Hubkolbenverdichtern besser abgedeckt wird. Dies führt zur Abnahme des Energieaufwandes für eine zusätzliche ...

Mehr Wärmeleistung
Der ZH Scroll-Verdichter liefert eine höhere Leistung bei niedrigen Verdampfungstemperaturen (Wärmequelle), wodurch der Wärmebedarf im Vergleich zu Hubkolbenverdichtern besser abgedeckt wird. Dies führt zur Abnahme des Energieaufwandes für eine zusätzliche Heizung.

Hohe Effizienz
Der ZH Wärmepumpen-Scrollverdichter hat ein spezielles Scrolldesign, das eine besonders hohe Leistungsfähigkeit in der Wärmepumpenanwendung erreicht, insbesondere bei geringer Wärmequellentemperatur. Über die Zeit erhöhen die ZH Scrolls ihre Leistungsfähigkeit, wie alle Copeland Scrollverdichter. Die meisten Hubkolbenverdichter hingegen neigen dazu, einiges ihrer Leistungsfähigkeit zu verlieren.

Höhere Wassertemperatur bei allen Anwendungen
Der ZH Scrollverdichter wurde optimiert für Anwendungen in neuen Gebäuden, wo die Anforderung für Raumheizung bei maximal 50°C liegt.

Leiser Betrieb
Der ZH-Scrollverdichter erreicht niedrige Schallwerte, eine spezifische Anforderung innen aufgestellter Wärmepumpen.

Haltbarkeit und Zuverlässigkeit
Der ZH-Scrollverdichter erfüllt die hohen Standards an Haltbarkeit und Zuverlässigkeit, wie auch alle anderen Copeland Scrollverdichter. Diese umfassen die Fähigkeit, kurzzeitig verhältnismäßig große Mengen Flüssigkeit zuzulassen, die bekanntermaßen die Mechanik eines Hubkolbenverdichters schädigen oder gar zerstören können. Weniger bewegliche Teile, robustes Triebwerk und geringe Vibrationen aufgrund kontinuierlicher Verdichtung machen den ZH Scrollverdichter zu der prädestinierten Lösung auf dem Wärmepumpenmarkt.

Schmiermittel
Esteröl Werksfüllung: Emkarate RL 32 3MAF (531.2827 Dose 1 ltr.)

 

show more


Kein direkter Nachfolger verfügbar. 
Ersatzverdichter bitte über unsere Techniker in „Copeland Select“ auslegen lassen.


Accessories / Replacement parts

  • Adapter set for conversion
    Copeland adapter set solder to Rotalock for ZR19/ZF48/ZS11 S+D 8515180
    Order No.: 103.1745
  • Crankcase heater
    Copeland oil sump heating 230V 83W/90W 8062619
    Order No.: 103.6517
  • Refrigerator oil
    Parker refrigerator oil RL 32-3 MAF can 1L
    Order No.: 531.2827
  • Parker refrigerator oil RL 32-3 MAF can 5L
    Order No.: 531.2828
  • Parker refrigerator oil RL 32-3 MAF can 20L
    Order No.: 531.2829
  • Rotalock valves
    Copeland rotalock valve set 2-1/4''x42mm + 1-3/4''x1-1/8'' 8511928
    Order No.: 103.1914
  • Sound insulation hood
    Copeland sound insulation hood ZF24-48,ZS56-11,ZR90K-ZR19 8540519
    Order No.: 103.4587
  • Copeland sound insulation hood without base plate f. ZR19,ZF48,ZS/ZB11 8559062
    Order No.: 103.4938
  • Copeland sound insulation hood with base plate f. ZR19,ZF48,ZS/ZB11 8559379
    Order No.: 103.4939

Technical data

Dimensions
Mounting holes
220x220 (8,5) mm
General information
Refrigerant
R134a
R407C
Type
ZH11M*E-TWD-524
Electrical Data
Starting current (locked rotor)
198,0 A
Supply voltage
400/3/50 V/Ph/Hz
Winding resistance
0,72 Ω
max. operating current
32,0 A
Weight
Weight net
112,0 kg
Performance data
Flow volume
42,76 m³/h
at 2900 rpm-1
Pipe connections
Pressure line
1 1/8 Inch
siehe Erläuterung 2,3
Suction line
1 5/8 Inch
siehe Erläuterung 2,3
Volume
Oil charge
RL32-3MAF
Oil quantity
4,1 l
see explanation 1

Note

  1. Compressors are delivered with an initial filling, The specified quantity is needed when refilling.
  2. Soldered bushes
  3. "L" = solder connection I.D., when using Rotalock valve pipe connection SL 7/8", DL 5/8" I.D.
Technical modifications reserved. Product images may differ from the actual product and are meant for demonstration purposes only. Absolutely no liability can be assumed for possible indication errors and errors in the manufacturers’ information.
Loading

Login now for complete access

To login
Article in stock