- Products
- Cold stores & accessories
- Packaged systems
- Ceiling-mounted packaged systems
- Rivacold ceiling block system TK SFL 020 PW 01/C R290 230V
Rivacold ceiling block system TK SFL 020 PW 01/C R290 230V
More in this category: Ceiling-mounted packaged systems
One click to the most important information:
Description
The SF series block systems consists of a compressor/condenser unit with control panel and generously proportioned evaporator. These are ceiling-mounted units with a very flat profile evaporator for making optimum use of the space within the cooling cell. They are a space-saving and simple to ...
?xml>The SF series block systems consists of a compressor/condenser unit with control panel and generously proportioned evaporator. These are ceiling-mounted units with a very flat profile evaporator for making optimum use of the space within the cooling cell. They are a space-saving and simple to install solution.
Features
A self-supporting housing made from electro-galvanised steel with epoxy powder coating.
The front of the housing is easy to open. This means that components are easy to access for inspection and maintenance;
Hermetic compressor with thermal protection
Cu/Alu finned heat exchanger for ...
A self-supporting housing made from electro-galvanised steel with epoxy powder coating.
The front of the housing is easy to open. This means that components are easy to access for inspection and maintenance;
Hermetic compressor with thermal protection
Cu/Alu finned heat exchanger for evaporator
Expansion capillary tube up to size 54
Waster-cooled condensers
Automatic defrosting with programmable intervals and duration
Electronic control can also be customised
Control panel set back
Electronic controller
High-pressure pressure control
Remote control panel with 5 m connection cable
Door contact switch with 2.5 m cable
Cooling cell light with 2.5 m cable
Evaporating tray for condensation water
Door frame heating connection for LBP versions with 2.5 m cable
Power supply cable (L = 2.5 m)
Mounting kit and overflow pipe
The amount of R290 required for each circuit is less than 150 g, meaning that you will have no problems setting up the units!