- Products
- Danfoss cooling controller without sensor AK-CC 550A 084B8030
Danfoss cooling controller without sensor AK-CC 550A 084B8030
One click to the most important information:
Description
Cooling controller AK-CC 550 with screw terminals. AK-CC 550A is a flexible cooling and superheating regulator. It optimises energy use at the cooling location. Pre-configured application-specific settings mean it can be quickly modified for use with different types of cooling equipment. ...
?xml>Cooling controller AK-CC 550 with screw terminals. AK-CC 550A is a flexible cooling and superheating regulator. It optimises energy use at the cooling location. Pre-configured application-specific settings mean it can be quickly modified for use with different types of cooling equipment. Depending on the application, more than one evaporator can be controlled. The AK-CC 550A is also optimised for CO2 systems.
Principle:
The temperature in the refrigeration unit is recorded by one or two temperature sensors placed in the airstream before the evaporator S3 or after the evaporator S4. Thermostat, alarm thermostat and sensor readouts on the display determine the extent to which the two sensor values should influence each function. Furthermore, a product sensor S6 can be used at any location within the refrigeration unit and the temperature around the goods can be measured directly. The evaporator temperature is recorded by sensor S5 and can be used to stop the defrosting period. Alongside an output for the type AKV electronic injection valve, the controller has 5 relay outputs that can be defined by the selected application.
Features
- Day/night thermostat as ON/OFF or following the modulating principle
- Product sensor S6 with separate alarm thresholds
- Switch between thermostat settings via digital input
- Adaptive superheating regulation
- Adaptive defrosting based upon evaporator power
- Start defrosting via schedule, digital input or ...
- Day/night thermostat as ON/OFF or following the modulating principle
- Product sensor S6 with separate alarm thresholds
- Switch between thermostat settings via digital input
- Adaptive superheating regulation
- Adaptive defrosting based upon evaporator power
- Start defrosting via schedule, digital input or network
- Natural, electrical or hot gas defrosting
- Stop the defrosting process based upon time and/or temperature
- Coordination of the defrosting process between several regulators
- Pulse fans if the thermostat is switched off
- Housing cleaning function for documentation of the HACCP procedure
- Control of frame heating via day/night load or dew point
- Door function
- Control two compressors
- Night shutter control
- Lighting control
- Heating thermostat
- Factory calibrated for higher precision measurements than required by the EN 441-13 standard without subsequent calibration (Pt1000 Ohm sensor).
- Integrated MODBUS communication with option to later install a LonWorks or Ethernet card.
- Optimisation of energy use for all refrigeration units
- A single controller for several different refrigeration units
- Display integrated into the front panel of the controller
- Fast configuration using pre-defined configurations
- Integrated data communication
- Integrated clock with power reserve
Accessories / Replacement parts
-
Connection cable
-
Pressure transmitter
-
Probe / sensor
Technical data
Detaillierte technische Daten finden Sie in der Bedienungsanleitung in der Rubrik Downloads!