Start-up current limiters

Alco start-up current limiter CSS-25U VDE 805205

Order No.: 298.0286
Manufacturer number: 805205
Manufacturer: Alco

More in this category: Start-up current limiters

One click to the most important information:

Description

The Soft Starter in the CSS series is used for limiting the starting current for 1-phase compressors. The integrated starting capacitor increases the moment of torque when the compressor starts and is then shut off. The compressor is constantly monitored during operation and shuts off if the ...
The Soft Starter in the CSS series is used for limiting the starting current for 1-phase compressors. The integrated starting capacitor increases the moment of torque when the compressor starts and is then shut off. The compressor is constantly monitored during operation and shuts off if the voltage is too low. It is restarted only after a time delay. The green LED flashes during the delay period. If there is a fault, then the red LED will light up; the alarm relay is also activated.

show more


Features

  • For single-phase motors with max. rated current of 25 A/32 A
  • Starting current limited to under 45 A
  • Automatically adapts for mains frequencies of 50 Hz and 60 Hz
  • Automatically adapted to the motor current - no manual settings required
  • Alarm relay output
  • The integrated starting capacitor improves ...
  • For single-phase motors with max. rated current of 25 A/32 A
  • Starting current limited to under 45 A
  • Automatically adapts for mains frequencies of 50 Hz and 60 Hz
  • Automatically adapted to the motor current - no manual settings required
  • Alarm relay output
  • The integrated starting capacitor improves the initial moment of torque and is shut off once the motor is running
  • Motor protection function:
    • Shuts off if voltage is too low
    • Detects a blocked rotor and shuts off
    • Delay function to limit the number times the motor is started per hour
  • Thyristor protection for a long contact service life
  • No additional motor contactor required
  • Self-test
  • Multifunctional clip for installing on cap rails - choice of two directions
  • Cage clamps for easy electrical connection

show more


Technical data

Dimensions
Width
140 mm
Height
66 mm
Depth
82 mm
Electrical Data
nominal current
25 A
Start-up capacitor
200 bis 240
?F
Weight
Weight net
0,4 kg
Temperature data
Storage temperature
-40 bis +65 °C
Ambient temperature
-20 bis +55 °C
Time
Start-up delay after stop
3 min
Technical modifications reserved. Product images may differ from the actual product and are meant for demonstration purposes only. Absolutely no liability can be assumed for possible indication errors and errors in the manufacturers’ information.

Customers also bought...

Loading

Login now for complete access

To login
Delivery item. Delivery time on request