Pego control box electronic 230V ECP 202 Expert with 2 NTC sensors

The scope of delivery includes 1 pc control board with display and keyboard for operating elements, 1 pc NTC sensor 10K 1% 1.5 m for room, 1 pc NTC sensor 10K 1% 3 m for evaporator and loose screw connections.

ECP 202 Expert with technical optimizations!

ECP 202 Expert is a microprocessor controlled refrigeration system controller for the control of room temperature, evaporator fans and defrost heating. The actual temperature is displayed on a three-digit LED display. The refrigeration control has five independent relay outputs, for compressor, evaporator fan, defrost heater, alarm output and cold room light. In addition, the ECP 202 Expert refrigeration control has two potential-free input contacts (door contact switch and compressor protection), which can be configured accordingly. The switching states of the individual outputs are shown on the display. Programming of the refrigeration system control is carried out via the keys located on the front panel. Furthermore, the ECP 202 Expert refrigeration control system has two NTC sensor inputs for determining the room temperature and the evaporator temperature. Sensor break and sensor short circuit are indicated in the display.

Design:
Conform to general directives and standards, such as:
CE, EN 61000-6-1 EN 61000-6-3 EN 60335 - 1.
In pump-down mode, the LP pressostat is connected to the digital input
(terminal INP-1 and INP-GND). The solenoid valve is connected to the AUX /Alarm relay. Parameter AU is set to 4.