- Products
- Cold stores & accessories
- Packaged systems
- Ceiling-mounted packaged systems
- Rivacold ceiling block system TK SFL 020 P 001/C R290 230V
Rivacold ceiling block system TK SFL 020 P 001/C R290 230V
More in this category: Ceiling-mounted packaged systems
One click to the most important information:
Description
The SF series block systems consist of a compressor/condenser unit with control panel and generously proportioned evaporator. These are ceiling-mounted units with a very flat profile evaporator for making optimum use of the space within the cooling cell. They are a space-saving and simple to ...
?xml>The SF series block systems consist of a compressor/condenser unit with control panel and generously proportioned evaporator. These are ceiling-mounted units with a very flat profile evaporator for making optimum use of the space within the cooling cell. They are a space-saving and simple to install solution.
Features
- A self-supporting housing made from electro-galvanised steel with epoxy powder coating.
- The front of the housing is easy to open. This means that components are easy to access for inspection and maintenance;
- Hermetic compressor with thermal protection
- Cu/Alu finned heat exchanger for ...
- A self-supporting housing made from electro-galvanised steel with epoxy powder coating.
- The front of the housing is easy to open. This means that components are easy to access for inspection and maintenance;
- Hermetic compressor with thermal protection
- Cu/Alu finned heat exchanger for evaporator
- Expansion capillary tube up to size 54
- Air-cooled condensers
- Automatic defrosting with programmable intervals and duration
- Electronic control can also be customised
- Control panel set back
- Electronic controller
- High-pressure pressure control
- Remote control panel with 5 m connection cable
- Door contact switch with 2.5 m cable
- Cooling cell light with 2.5 m cable
- Evaporating tray for condensation water
- Door frame heating connection for LBP versions with 2.5 m cable
- Power supply cable (L = 2.5 m)
- Mounting kit and overflow pipe
The amount of R290 required for each circuit is less than 150 g, meaning that you will have no problems setting up the units!
Technical data
*The specified cooling performance data is based on the following values
Intake gas temperature: +20 °C
Supercooling: 0K
Superheating: 100%
Compressor draw: to -10 °C (HBP/MBP); tc +50 °C; / to -30 °C (LBP); tc +50 °C