Domestic hot water heaters
DK domestic water heater with correx anode 200/1 200L 6bar with PVC insulation B1
Icon. Image similar to product.
Order No.: 760.6101
Manufacturer number: S10023
Manufacturer: DK-Kälteanlagen
More in this category: Domestic hot water heaters
One click to the most important information:
Description
Best possible energy efficiency using a patented water layering principle (see diagram in the component catalogue). Optimal safety with a double-walled heat exchanger and the ability to connect leak indicators. Outstanding corrosion-protection from a special enamel coating on the container and ...
Best possible energy efficiency using a patented water layering principle (see diagram in the component catalogue). Optimal safety with a double-walled heat exchanger and the ability to connect leak indicators. Outstanding corrosion-protection from a special enamel coating on the container and non-galvanising integrated heat exchangers. This ensures that no corrosion can occur due to the various properties of the materials used. Easy to service with an NW 200 inspection flange to which no parts are attached. In existing systems, additional heat exchangers can be added up to the maximum possible, without having to remove those that are already installed. Easy to install using removable foam insulation with a PVC sheath. There are no connections at the rear of the container so that insulation can be installed with minimal distance from the wall. All heat exchangers can be configured to lead out to a particular side for easier connection to the refrigerant supply on request. Higher power system can have several heat exchangers set up in parallel. (Additional costs apply)<br> <br> Standing tank designed for 6 bar operating pressure, special container enamel, magnesium anode, including thermometer and insulation. Connections cold/hot water 11/4”.<br> NW 200 inspection flange in lower part of the tank bottom.<br> <br> DX process water heaters need to be handled carefully during transport. The enamel layer is sensitive to shocks and impacts. The heat exchanger is attached to the pipe ends in the bottom of the tank without any additional supports. If transporting over long distances, the process water heater must be placed upright. If not otherwise possible, it can be delivered laid down provided that a truck with good suspension is used.
Accessories / Replacement parts
-
Boiler thermostat
-
Heat exchanger
-
Heating cartridge
-
Impressed current anode
-
Superheating protection thermostat
-
Thermometer
Technical data
Dimensions
Diameter (without insulation)
500 mm
Height (without insulation)
1290 mm
General information
Insulation
WeichschaumIsolierung
Possible to install heat exchangers
Normal version
1 WT 16/10 oder 1 WT 18/12 oder 1 WT 22/16
Special version
4 WT 16/10 oder 4 WT 18/12 oder 4 WT 22/16
Type
DK200/1 m.PVC
maximum installation option
1 pcs
Wärmetauscher
Weight
Weight net
95 kg
Volume
Nominal content
200 l
Technical modifications reserved. Product images may differ from the actual product and are meant for demonstration purposes only. Absolutely no liability can be assumed for possible indication errors and errors in the manufacturers’ information.
Loading