- Products
- Refrigeration components
- System components
- Oil regulation systems
- Oil collecting vessels
- ESK oil collecting vessel CO2 OSA-32-CDM 60bar
ESK oil collecting vessel CO2 OSA-32-CDM 60bar
More in this category: Oil collecting vessels
One click to the most important information:
Description
ESK oil reservoirs OSA-CDM are approved for use with R744 (CO2).
The oil reservoir should be placed at the same height or geodetically higher than the oil level regulator. Each oil reservoir must be fitted with a heating element (see accessories).
When the compressor is not running, the ...
ESK oil reservoirs OSA-CDM are approved for use with R744 (CO2).
The oil reservoir should be placed at the same height or geodetically higher than the oil level regulator. Each oil reservoir must be fitted with a heating element (see accessories).
When the compressor is not running, the heating element must be turned on in order to prevent deposits of refrigerant building up in the reservoir.
During commissioning, the reservoir must be filled to the upper inspection glass with compressor refrigeration machine oil. Top up the oil only if the oil level falls below the lower inspection glass.
Technical data OSA-CDM
Max. permitted operating temperature [°C]: +100 to
- 10
- 10 to -40
Max. permitted operating pressure [bar]: 60 45