Stepper motor controls
Also universal stepper motor controller EXD-U01 804750
Icon. Image similar to product.
Description
The EXD-U01 stepper motor controller allows electronic valves EX4/EX5/EX6/EX7/EX8 & CX4/CX5/CX6/CX7 from EMERSON to be used as:
- CX4-7: High pressure valve for medium pressure vessels (CO2 transcritical)
- Bypass valves for medium pressure vessels (CO2 transcritical)
- Power regulator using hot gas ...
The EXD-U01 stepper motor controller allows electronic valves EX4/EX5/EX6/EX7/EX8 & CX4/CX5/CX6/CX7 from EMERSON to be used as:
- CX4-7: High pressure valve for medium pressure vessels (CO2 transcritical)
- Bypass valves for medium pressure vessels (CO2 transcritical)
- Power regulator using hot gas bypass or evaporator pressure control
- Start-up regulator
- Heat recovery regulator
- Fluid level regulator
Features
- Analogue input signal: 4 to 20 mA or 0 to 10 V
- “Plug and Run”: ready to use immediately after installation and connecting up, no parameter input required
- Simple DIP switch configuration
- Digital input for closing the valve
- Aluminium housing for DIN rail installation
- Simple cabling
- Tested and ...
- Analogue input signal: 4 to 20 mA or 0 to 10 V
- “Plug and Run”: ready to use immediately after installation and connecting up, no parameter input required
- Simple DIP switch configuration
- Digital input for closing the valve
- Aluminium housing for DIN rail installation
- Simple cabling
- Tested and ready to use
- For EMC: CE labelling
Accessories / Replacement parts
-
Connection terminals
-
Transformer
-
Uninterruptible power supply
Technical data
General information
Type
EXD-U01
Electrical Data
Input signal analog
0 bis 10 V
Input resistance
364
?
Impedance
27
k?
Technical modifications reserved. Product images may differ from the actual product and are meant for demonstration purposes only. Absolutely no liability can be assumed for possible indication errors and errors in the manufacturers’ information.