- Products
- Refrigeration components
- Regulators
- Electronic
- Motor protection units
- Kriwan motor protection device internal INT 69 230V 22A461
Kriwan motor protection device internal INT 69 230V 22A461
More in this category: Motor protection units
One click to the most important information:
Description
Up to nine PTC sensors according to DIN 44081, DIN 44082 can be connected to the measurement circuit input of the INT69, each with different rated trigger temperatures. It is therefore possible to monitor several measurement points with just one INT69 trigger device.
If the temperature in one ...
Up to nine PTC sensors according to DIN 44081, DIN 44082 can be connected to the measurement circuit input of the INT69, each with different rated trigger temperatures. It is therefore possible to monitor several measurement points with just one INT69 trigger device.
If the temperature in one of the monitored parts or sections reaches the specified trigger temperature of the PTC sensor, the resistance increases and the trigger device switches off.
The device automatically reactivates once the temperature has dropped back down.
The relay switch output is designed as an isolated switch contact. This circuit works on the closed current principle, i.e. the relay goes into its neutral position when there is a sensor or cable break and switches off.
Galvanic separation between sensor, relay and power supply circuits.
Features
- Type: 1-9 PTC sensors according to DIN 44081, DIN 44082 in series
- R25, total: <1.8 kΩ
- Retrigger: 4.5 kΩ ±20%
- Reset: 2.75 kΩ ±20%
- Max. length of connection line: 30 m
- Mechanical service life: Approx. 1 million switching cycles
- Connection type: Screw terminals
- ...
- Type: 1-9 PTC sensors according to DIN 44081, DIN 44082 in series
- R25, total: <1.8 kΩ
- Retrigger: 4.5 kΩ ±20%
- Reset: 2.75 kΩ ±20%
- Max. length of connection line: 30 m
- Mechanical service life: Approx. 1 million switching cycles
- Connection type: Screw terminals
- Housing material: PA glass fibre reinforced