- Products
- Refrigeration components
- Regulators
- Electronic
- Cooling controller
- Dixell cooling controller XR20CH-5N0C1 230V
Dixell cooling controller XR20CH-5N0C1 230V
More in this category: Cooling controller
One click to the most important information:
Description
Regulator with compressor shut-off defrosting, HOT KEY, without sensor:
The CH series features a flat modern front panel that guarantees better hygiene!
The XR20CH device is designed for front panel installation 74 x 32 mm. It is a microprocessor-controlled temperature regulator with one relay ...
Regulator with compressor shut-off defrosting, HOT KEY, without sensor:
The CH series features a flat modern front panel that guarantees better hygiene!
The XR20CH device is designed for front panel installation 74 x 32 mm. It is a microprocessor-controlled temperature regulator with one relay output for regulating the compressor and cyclical defrosting that shuts off the compressor.
Up to two PTC/NTC temperature sensors can be connected.
One for temperature regulation and the 2nd sensor (depending on variant) is configured via the HOT KEY connection.
For condenser temperature alarm. Using CH parameters, the controller can be configured to cool or heat.
The device can be programmed via HOT KEY and parameter sets stored on a HOT KEY.
Depending on the model, an external X-REP display can be connected to the HOT KEY connection.
Features
- Simple programming mode
- Fast cooling using pre-set target value
- Serial connection to remote monitoring system
Accessories / Replacement parts
-
Interface adapter
-
NTC pipe contact sensor
-
NTC temperature sensor
-
PTC temperature sensor
-
Programming key
-
Rubber seal
Technical data
Detailed technical data can be found in the operating manual under downloads!