Pego control box electronic 230V ECP PlusR 200 Expert with data logger 3NTC

The ECP - PlusR 200 Expert is a microprocessor controlled cooling system controller for regulating room temperature, evaporator fan and defrosting heater. The room and evaporator temperature are shown on a backlit LCD display. The cooling system controller features five independent relay outputs, one each for the compressor, evaporator fan, defrosting heater, alarm output and room lighting. The ECP - PlusR 200 Expert cooling system controller also features three isolated input contacts (door contact switch, alarm switch and compressor protection) that can be configured.
The state of each output is shown on the display along with the current time and month. The cooling system controller is programmed using the six buttons on the front panel. The ECP-PlusR 200 Expert controller further features three NTC sensor inputs for reading the room and evaporator temperatures as well as data logging. Sensor breaks and short circuits are shown on the display. The ECP PlusR 200 Expert controller features an integrated data logger for storing temperature and alarm data.
The stored values can be shown on the display by selecting the relevant menu entries or transferred directly to a USB memory stick. Alternatively, data can be exported via a Bluetooth module (ask your specialist dealer for further information). Data can be exported to the computer in the open CSV format or via the TeleNet software from Pego that is optionally available from your specialist dealer.

Features:

• 1x control board with display and keyboard for input elements incl. data logger
• 1x power board
• 3x NTC sensors 10 K 1%
• Various screw connections for wiring

User note:

• The ECP PlusR 200 Expert must be installed by trained technicians only.
• Modifications to the device can affect safety.
• Check type label for power supply information
• The manufacturer assumes no liability where modifications or improper use has been made of the equipment.