- Products
- Mounting material
- Fittings
- Press fittings
- T-piece
- Parker ZoomLock braze-free fitting T-piece PZK-T10-HNBR 5/8''
Parker ZoomLock braze-free fitting T-piece PZK-T10-HNBR 5/8''
More in this category: T-piece
One click to the most important information:
Description
The ZoomLock™ pipe connection system is an innovative system for joining pipes without the use of solder and is suitable for any refrigeration and air conditioning application. Pipes can be joined with a simple tool and using minimal force.
ZoomLock™ fittings allow properly sealed ...
?xml>The ZoomLock™ pipe connection system is an innovative system for joining pipes without the use of solder and is suitable for any refrigeration and air conditioning application. Pipes can be joined with a simple tool and using minimal force.
ZoomLock™ fittings allow properly sealed pipe connections to be made without using solder, making it much faster and easier to join copper pipes. These single-piece fittings also stay reliably in place, are leak-proof and offer better reproducibility than solder connections - meaning no compromise needs to be made on quality or functionality.
The time needed and costs of work for connecting pipes are significantly reduced by not having to solder. Solder-free pipe connections increase productivity, profit potential and offer numerous other advantages.
Features
- Vibration-resistance: Corresponds to UL109
- Available sizes (inch): 1⁄4", 5⁄16", 3⁄8", 1⁄2", 5⁄8", 3⁄4", 7⁄8", 1.1⁄8", 1.3⁄8"
- Fitting body: Refrigerant-resistant copper according to ASTM-B280
- O-ring: HNBR
- Approved oils: Mineral oil, POE, PVE, PAG
- Approved pipe materials: ...
- Vibration-resistance: Corresponds to UL109
- Available sizes (inch): 1⁄4", 5⁄16", 3⁄8", 1⁄2", 5⁄8", 3⁄4", 7⁄8", 1.1⁄8", 1.3⁄8"
- Fitting body: Refrigerant-resistant copper according to ASTM-B280
- O-ring: HNBR
- Approved oils: Mineral oil, POE, PVE, PAG
- Approved pipe materials: Copper-copper joins
- Approved copper pipe types for use with Klauke® compatible press clamps:
- Hard copper (drawn) 1⁄4"–1.1⁄8" type ACR, M, L- type K only up to 7⁄8"
- Soft copper (annealed) 1⁄4"–1.1⁄8" type ACR, L - type K only up to 7⁄8"
- Approved copper pipe types for use with RIDGID® compatible press clamps:
- Hard copper (drawn) 1⁄4"–1.3⁄8" type ACR, M, L - type K only up to 1.1⁄8"
- Soft copper (annealed) 1⁄4"–1.3⁄8" type ACR, L - type K only up to 1.1⁄8"
- Approved refrigerants
- 1234yf, 1234ze, 125, 32, 134a, 143A
- 404A, 407A, 407C, 407F, 410A, 438A
- 447A, 448A, 449A, 450A, 452A
- 507, 513A
Vorteile
- Weniger Ausrüstung und kein Gas erforderlich
- Sicheres Arbeiten, keine Brandgefahr
- Keine Genehmigungen für Lötarbeiten erforderlich
- Umweltfreundlicher
- Keine Qualitätsprobleme durch Lötfehler
- Flexiblerer Zugang zum Installationsort
- Keine Stickstoffspülung nötig