- Products
- Measurement and testing devices
- Electrical measurement and testing devices
- Clamp on ammeter
- TIF digital multimeter TIF 275
TIF digital multimeter TIF 275
More in this category: Clamp on ammeter
One click to the most important information:
Description
The TIF 275 takes on all important electrical measuring tasks. The possibility of incorrect settings is excluded since the measured variables are automatically recognized based on the assignment of the measuring sockets and are additionally displayed by illumination of the appropriate function ...
?xml>The TIF 275 takes on all important electrical measuring tasks. The possibility of incorrect settings is excluded since the measured variables are automatically recognized based on the assignment of the measuring sockets and are additionally displayed by illumination of the appropriate function keys.
The multimeter can perform the following measurements:
- DC and AC voltage
- DC and AC current
- Resistance measurement and continuity test.
- Frequency measurement
- Duty cycle
- Capacity measurement
- Diode test
- Temperature with type Pt100 or Pt1000 sensor
Each of these functions can be selected using the 7-position rotary switch. A built-in operator error protection (ABS) prevents damage to the measuring device by closing the input sockets in relation to the selected measuring function. There are other function keys available that enable the functions to be changed via the display. The selected setting is displayed along with a reference to the unit of measurement and active functions. In order to save battery power, the device shuts off 10 minutes after the last time a function key was pressed or the rotary switch position is changed. The system is switched on again by selecting the rotary switch position OFF and switching it on again.
Features
- Voltage AC / DC up to 1000 V, current AC / DC up to 10 A.
- Resistance measurement, frequency, diode test, capacity, duty cycle, temperature measurement with optional PT1000 sensor
- Automatic blocking system protects against incorrect connection
- Data HOLD, bar graph, min / max and automatic ...
- Voltage AC / DC up to 1000 V, current AC / DC up to 10 A.
- Resistance measurement, frequency, diode test, capacity, duty cycle, temperature measurement with optional PT1000 sensor
- Automatic blocking system protects against incorrect connection
- Data HOLD, bar graph, min / max and automatic shutdown
- Battery life: approx. 220 hours (DC V / A), 80 hours (AC V / A)
- Display specification: 3¾ LCD with max. displaying 3100 digits + symbols and decimal places and bar graph
- The instrument fulfils: IEC/EN 61010-1
- Insulation: Class 2, double insulation
- Overvoltage category: CAT IV 600V, CAT III 1000V
- For indoor use, max. height: 2000 m
Scope of delivery
- Measuring gauge
- Two measuring lines
- Operator's manual
- Protective holster
- ISO 9000 calibration certificate
- Battery
- Spannung AC/DC bis 1000 V, Strom AC/DC bis 10 A
- Widerstandsmessung, Frequenz, Diodentest, Kapazität, Tastverhältnis, Temperaturmessung mit optionalem PT1000 Fühler
- Automatisches Blockiersystem schützt vor falschem Anschließen
- Data HOLD, Balkenanzeige, Min/Max und automatische Abschaltung
- Spannung AC/DC bis 1000 V, Strom AC/DC bis 10 A
- Widerstandsmessung, Frequenz, Diodentest, Kapazität, Tastverhältnis, Temperaturmessung mit optionalem PT1000 Fühler
- Automatisches Blockiersystem schützt vor falschem Anschließen
- Data HOLD, Balkenanzeige, Min/Max und automatische Abschaltung