Testo infrared thermometer testo 830-T2 with 2-point laser 0560 8302

Infrared thermometer with 2-point laser spot marking, adjustable limit values, alarm function and the possibility to connect external probes. The quick and universal infrared thermometer with 2-point laser marking and 12:1 optics. Connection possibility for external type K sensors for contact measurement.

The IR thermometer testo 830-T2 also impresses with its speed: It can carry out two measurements per second. This allows you to perform even larger measurement tasks quickly and efficiently.
The testo 830-T2 IR thermometer also offers the possibility of contact measurement in addition to infrared measurement. To achieve this, simply connect an optionally available TE type K temperature sensor to the infrared measurement device. Testo offers a wide selection of sensors: e.g. a fast-reacting surface sensor with spring-loaded thermocouple band, but also air sensors or immersion/penetration sensors (for liquids and pasty media).
The emissivity of the infrared thermometer can be adjusted on an individual basis. This means that you can adjust the emissivity exactly to the material of the surface to be measured to achieve the best possible measurement results. We recommend using an emission adhesive tape (optional) for blank surfaces with low emissivity, which considerably simplifies the IR measurement.

• 12:1 optics for larger surfaces
• 2-point laser for measurement spot marking
• Display of current value and hold value
• Acoustic and visual alarm when limit values are exceeded
• Rapid data logging of 2 measurements per second
• Display illumination
• Emissivity determination with external TE sensor
• 2 laser beams for measurement spot marking
• Contact measurement with connectable temperature sensor
• Battery type 9V block battery
• Accuracy (sensor type K): ±(0.5 °C +0.5% of measurement value)
• Accuracy (infrared sensor type): ±1.5 °C or ±1.5% of measurement value (+0.1 … +400 °C) ±2 °C or ±2% of measurement value (-30 … 0 °C)