- Products
- Bitzer semi-hermetic compressor BE6 66GE-80Y-40P 400V
Bitzer semi-hermetic compressor BE6 66GE-80Y-40P 400V
![](/Produktbilder-Lieferantenlogos/Bitzer/Verdichter/image-thumb__2060__product-detail-img-teaser/BITZER%20TANDEMVERDICHTER%208081-11K.png)
![Bitzer semi-hermetic compressor BE6 66GE-80Y-40P 400V Bitzer semi-hermetic compressor BE6 66GE-80Y-40P 400V](/Produktbilder-Lieferantenlogos/Bitzer/Verdichter/image-thumb__2060__product-detail-img/BITZER%20TANDEMVERDICHTER%208081-11K.png)
![](/Produktbilder-Lieferantenlogos/Bitzer/image-thumb__165212__detail-brand-img/BITZER%2BAD~-~767w.png)
One click to the most important information:
Description
Tandem compressors are the simplest type of parallel compressor system using two compressors
Exceptionally effective performance scaling can be achieved by turning a single compressor on and off. The 4 and 6 cylinders models can also be fitted with power regulators (cylinder shut-off) to allow ...
Tandem compressors are the simplest type of parallel compressor system using two compressors
Exceptionally effective performance scaling can be achieved by turning a single compressor on and off. The 4 and 6 cylinders models can also be fitted with power regulators (cylinder shut-off) to allow operation with up to four or six performance levels. Affordable and energy-efficient full and partial load operation is possible using all conventional refrigerants, especially in applications with widely varying loads.
ECOLINE models
This series of tandem compressors use 2-6 cylinder BITZER semi-hermetic compressors, opening a new dimension for simple and compact parallel systems. This is in addition to the usual features of semi-hermetic compressors.
For further information regarding the technical design of the compressors, see single compressors.
Performance data
All values are based on European norm EN 12900 and 50 Hz operation. The evaporation and condensation temperatures refer to dew point values (saturation conditions).
All data is without fluid super-cooling. Based on EN 12900 this data contains significantly different values compared to data acquired from using a 5 or 8.3 K super-cooler.
See refrigerant report (A-500) for explanations.
Power consumption and usage limitations
See KP-104 and BITZER software. Usage limitations are the same as for a single compressor.
Accessories / Replacement parts
-
Additional ventilator
-
Check valve
-
Control valve for power controller
-
Crankcase heater
-
Electronic oil pressure safety switch
-
Injector valve
-
Motor protection
-
Oil pressure safety switch
-
Oil servicing valve
-
Option: Refrigerator oil BSE55 with R134a, tc > 70 °C
-
Power controller
-
Pressure transducer
-
Pressurised gas temperature sensor
-
Refrigerator oil
-
Unloaded start system
Technical data
Explanations
- Data for 400 V/3/50 Hz with direct mains power supply.
Tolerance (±10%) based on the mean voltage range. Other voltages and current types on request
380-420 PW YY-3-50 Hz
440-480 PW YY-3-60 Hz
Observe the max. operation current / max. power input when selecting contactors, leads and fuses. Contactors: Category AC3. Implement both motor contactors for about 60% of the operating current for PW start up.
Part winding motor Y/YY. Wind distribution 50%/50%. Y/ design on request