Danfoss rotalock valve press.gau.conn.right/byp.conn.left 1''x12mm + 1/2'' solder V06 8168031

Angle valves are installed in the refrigerant circuits of refrigeration systems. They are used for shutting off, securing and controlling refrigerant flows. The angle valves are operated by hand. The various types of connection allows equipment such as compressors, containers, etc. to be ...

Angle valves are installed in the refrigerant circuits of refrigeration systems. They are used for shutting off, securing and controlling refrigerant flows. The angle valves are operated by hand. The various types of connection allows equipment such as compressors, containers, etc. to be integrated into refrigerant lines. The angle valves are designed according to DIN EN 12284: 2001-01. The valves are compliant with RoHS 2002/95/EC (directive on the restriction of hazardous substances) and the pressure equipment directive 2014/68/EU.

Steel housing consisting of several sections that can be assembled in various ways
High-strength, solid hard solder connections using controlled atmosphere furnace brazing
Strength and seal tightness of each fixture checked
Use of high-temperature resistant gland packing made from graphite, gland ...

Steel housing consisting of several sections that can be assembled in various ways
High-strength, solid hard solder connections using controlled atmosphere furnace brazing
Strength and seal tightness of each fixture checked
Use of high-temperature resistant gland packing made from graphite, gland packings can be retensioned at any time
Surface finish with tin-plating, copper-plating or combination coatings
Low mass due to optimal use of materials
Use of robust, dense plastic screw caps
7/16-20 UNF flare connections with shut-off in various positions for connecting manometers
7/16-20 UNF flare connections without shut-off in various positions for connecting pressure monitors
Stem seals on fully opened valves

Stahl-Gehäuse, aus mehreren Teilen variabel zusammengesetzt
Hochfeste und absolut dichte Hartlötverbindung durch Schutzgasofenlötung
Überprüfung der Festigkeit und Dichtheit an jeder Armatur
Einsatz von hochtemperaturbeständigen Stopfbuchsenpackungen aus Grafit, Nachspannen der ...

Stahl-Gehäuse, aus mehreren Teilen variabel zusammengesetzt
Hochfeste und absolut dichte Hartlötverbindung durch Schutzgasofenlötung
Überprüfung der Festigkeit und Dichtheit an jeder Armatur
Einsatz von hochtemperaturbeständigen Stopfbuchsenpackungen aus Grafit, Nachspannen der Stopfbuchse ist jederzeit möglich
Oberflächenveredlung durch Verzinnen, Verkupfern bzw. Kombinationsbeschichtungen
Geringe Masse durch optimale Materialausnutzung
Einsatz von robusten und dichten Schraubkappen aus Kunststoff
Absperrbare Bördelanschlüsse 7/16-20 UNF in verschiedenen Positionen zum Anschluß von Manometern
Nichtabsperrbare Bördelanschlüsse 7/16-20 UNF in verschiedenen Positionen zum Anschluß von Druckwächtern
Spindelrückdichtung bei vollständig geöffnetem Ventil