Calorflex condensation water drain heater CDLA1792 / Length = 6.0 m / Power = 240 W
More in this category: Drain heaters
One click to the most important information:
Description
Heating cables in the CDLx series are normally installed in equipment that forms part of cooling systems in buildings and industry and in air conditioning systems. The vulcanised coupling and integrated cold part give the cable a waterproof structure allowing it to be installed directly inside ...
Heating cables in the CDLx series are normally installed in equipment that forms part of cooling systems in buildings and industry and in air conditioning systems. The vulcanised coupling and integrated cold part give the cable a waterproof structure allowing it to be installed directly inside pipes. It is delivered already cut to size and ready to use. Length cannot be shortened by the end user.
Features
- Power supply 1.5 V to 400 V
- Power: from 5 W/m to 80 W/m
- Outer diameter: 5.5 mm ± 0.2 mm (except vulcanised coupling)
- Insulation: silicone (standard models as per table)
- Minimum bend radius: 15 mm
- Operating temperature: from -60 °C to +200 °C
- Size of heating and cooling range can be ...
- Power supply 1.5 V to 400 V
- Power: from 5 W/m to 80 W/m
- Outer diameter: 5.5 mm ± 0.2 mm (except vulcanised coupling)
- Insulation: silicone (standard models as per table)
- Minimum bend radius: 15 mm
- Operating temperature: from -60 °C to +200 °C
- Size of heating and cooling range can be personalised
- Metal mesh and yellow-green cable if desired
- Available certifications: EC
- Produced and approved to EN60335. Complies with Directive 2014/35/EC
- Different insulations and diameters available on request and depending on feasibility