Panasonic air conditioner outdoor unit PACi standard PZ U-60PZ2E5 6.0kW 230V R32
Description
High-quality technology and an attractive design make PACi Standard an ideal solution for demanding applications where operating efficiency is important. The compact design a low weight makes these units suitable for smaller commercial and private applications where space is limited. These ...
High-quality technology and an attractive design make PACi Standard an ideal solution for demanding applications where operating efficiency is important. The compact design a low weight makes these units suitable for smaller commercial and private applications where space is limited. These outdoor units are significantly more compact than previous models and their low weight makes them suitable for use in a wide range of different locations.
After successfully switching its entire range of home air conditioners to use the environmentally friendly refrigerant R32, Panasonic is now also doing the same with its PACi outdoor units for commercial systems. The PACi models in the Elite range have power ratings from 3.6 to 14.0 kW. The PACi models in the Standard range have power ratings from 6.0 to 14.0 kW.
Benefits of R32:
• Easy to install, easy to use
• Minimal negative environmental affects
• Saves energy and reduces costs
• Small dimensions
Features
- Compact outdoor units, just one fan up to 14 kW
- Good balance between system cost and energy efficiency
- Excellent ESEER/SCOP values for this device category with standard inverter.
- SEER: A++ / SCOP: A+ with 10.0 kW device combined with 4-way cassette
- Can be combined with all regulation and control ...
- Compact outdoor units, just one fan up to 14 kW
- Good balance between system cost and energy efficiency
- Excellent ESEER/SCOP values for this device category with standard inverter.
- SEER: A++ / SCOP: A+ with 10.0 kW device combined with 4-way cassette
- Can be combined with all regulation and control options for ECOi
- Can be used in dual systems
Technical data
(min. - max.)
Notes
- EER/COP values are calculated based on EN14511.
- SEER/SCOP values are calculated according to EU Regulation 626/2011 for models with a rated power up to 12 kW and EU Regulation 2281/2016 for models with a rated power above 12 kW.
- The annual power consumption is calculated based on the specifications in EU Regulation 626/2011.
- Measurement locations - indoor unit: 1 m in front of and 1 m below the unit. The measured values are based on EUROVENT document 6/C/006-97.
- Outdoor unit placed higher than indoor unit. * A fuse of 3 A is recommended for the indoor unit.