Panasonic air conditioner outdoor unit PACi elite PE U-140PE1E8A 14KW 400V R410A
Description
The energy-saving design, the good performance values and optimised partial load operation makes PACi Elite at optimally designed air conditioning system for commercial use. The energy-saving design of the fans, fan motors, compressors and heat exchangers together provide COP values that are ...
The energy-saving design, the good performance values and optimised partial load operation makes PACi Elite at optimally designed air conditioning system for commercial use. The energy-saving design of the fans, fan motors, compressors and heat exchangers together provide COP values that are among the best in the sector.
Features
· Adheres to all safety regulations to ensure quality and safety of the device
· Top energy efficiency: ESEER: A++ / SCOP: A++ for a 10.0 kW device in combination with a 4-way cassette
· DC inverter technology and R410A for outstanding energy-effiency
· Cooling operation at outdoor ...
· Adheres to all safety regulations to ensure quality and safety of the device
· Top energy efficiency: ESEER: A++ / SCOP: A++ for a 10.0 kW device in combination with a 4-way cassette
· DC inverter technology and R410A for outstanding energy-effiency
· Cooling operation at outdoor temperatures down to -15 °C
· Heating operation at outdoor temperatures down to -20 °C
· Compact outdoor units
· Can be used in dual, trio and quattro systems
Accessories / Replacement parts
-
Other accessories
Technical data
(min. - max.)
- Devices with rated power above 12 kW are not covered by the Ecodesign Directive.
- The annual power consumption is calculated based on the specifications in the ErP Directive.
- The heating performance data already accounts for defrosting processes.
- Measurement locations: Indoor unit: 1.5 below the ceiling, centrally beneath the unit. Outdoor unit: 1 m in front of the device at a height of 1.5 m. The measured values are based on EUROVENT document 6/C/006-97.
- Measured from lower edge of the ceiling.
- Recommended fuse protection and electrical cable cross-section based on 25 m with laying system B2. These values must be checked at the installation location by an electrician and adjusted as necessary to comply with the legal regulations.