Thermostats
Penn frost protection thermostat 270XTAN-95048 (TB) -24/+18C
Icon. Image similar to product.
Order No.: 282.2285
Manufacturer number: 270XTAN-95048
Manufacturer: Penn
More in this category: Thermostats
One click to the most important information:
Description
These thermostats are used wherever heat exchangers or water-bearing pipe systems exposed to cold air need to be protected from the effects of low temperatures (e.g. in an air duct). The frost protection thermostats activate a switch contact if the temperature drops below the set value and ...
These thermostats are used wherever heat exchangers or water-bearing pipe systems exposed to cold air need to be protected from the effects of low temperatures (e.g. in an air duct). The frost protection thermostats activate a switch contact if the temperature drops below the set value and triggers the necessary switching operations such as:
- Interrupt the power to the fan
- Actuate valves
- Shut-off the compressor
- Close air intakes
- Activate a visual or acoustic signal, etc.
Features
- steam filled (response length with temperature exposure of min. 30 cm across the total length)
- 6 m capillary pipe sensor Ø 3.2 mm (surface sensor)
- 2 m capillary pipe with sensor cartridge Ø 9.7 x 77 mm
Technical data
Dimensions
Diameter
9,5 mm
Height
77 mm
Cable entry
22,3 mm
Capillary tube length
2 m
General information
Version
TB
Type
Frostschutzthermostat
Difference
Handrückst.
Type
270XTAN95048
Temperature data
Temperature measuring range
max.
18 °C
min.
-24 °C
Ambient temperature
-35 bis +55 °C
max. sensor temperature
120 °C
Technical modifications reserved. Product images may differ from the actual product and are meant for demonstration purposes only. Absolutely no liability can be assumed for possible indication errors and errors in the manufacturers’ information.
Loading