Euro-Line composite rate without terminal box EV3DO-H201CS R134a with condenser w.HR
One click to the most important information:
Description
Schiessl Euro Line power racks operate with 3 semi-hermetic Dorin compressors with the same cooling power. To control the power rack, a power rack controller is used in combination with a pressure transmitter. This is mounted and thermally decoupled on the intake side and records the actual ...
Schiessl Euro Line power racks operate with 3 semi-hermetic Dorin compressors with the same cooling power. To control the power rack, a power rack controller is used in combination with a pressure transmitter. This is mounted and thermally decoupled on the intake side and records the actual intake pressure value.
The rack controller is available together with the optional control box that is mounted on the front left. The Dixell XC440C controller is used. All components are built with a tough riveted steel profile frame. All parts of the frame are powder-coated. The power rack stands on the supplied rubber-bonded metal bases. During assembly, the system must be placed horizontally using a spirit level.
The power rack can be ordered in the following version:
- Power rack without condensers
- Power rack with condensers
- Power rack without condensers and with connection for heat recovery system
- Power rack with condensers and connection for heat recovery system
Optional accessories include a manometer board and weatherproof housing. Schiessl recommends using an intake filter - these are also available as separate accessories.
Features
- optimally adapt compressor performance to changing loads on the refrigeration system
- low minimum cooling power
- minimal space needed due to compact design
- energy saving from better performance control in optimal evaporating temperatures
- simple to replace compressors mean it is easy to service
- reduce ...
- optimally adapt compressor performance to changing loads on the refrigeration system
- low minimum cooling power
- minimal space needed due to compact design
- energy saving from better performance control in optimal evaporating temperatures
- simple to replace compressors mean it is easy to service
- reduce the installed cooling power and thus the cost of investment by use of coincidence factor
- simple installation of a heat recovery systems using a common heat exchanger for all areas to be cooled
Scope of delivery
- 3 semi-hermetic Dorin compressors
- crankcase heater
- high pressure monitor for each compressor, type tested (cartridge format, fixed configuration)
- low pressure monitor, type tested
- pressure transmitter, LP -0.5 to 7 bar
- oil equalisation line with inspection glass
- oil separator with shut-off valve and ...
- 3 semi-hermetic Dorin compressors
- crankcase heater
- high pressure monitor for each compressor, type tested (cartridge format, fixed configuration)
- low pressure monitor, type tested
- pressure transmitter, LP -0.5 to 7 bar
- oil equalisation line with inspection glass
- oil separator with shut-off valve and inspection glass in the oil return line
- optimised common intake piece, insulated
- fluid collector
- refrigerant filter and inspection glass combination in the fluid line
Zubehör / Ersatzteile
Für passende Ersatzteile zu unseren Produkten wenden Sie sich bitte an unsere Techniker.
