- Products
- Güntner air cooler CUBIC with heating AC GACC RX 031.1/3-70.E-1845991
Güntner air cooler CUBIC with heating AC GACC RX 031.1/3-70.E-1845991
One click to the most important information:
Description
Quality standard ISO 9001
Performance data according to Eurovent
TÜV HACCP-certified: suitable for use in food preparation and processing
Outflow direction: horizontal (suction)
HACCP hygiene certificate
Especially suitable for areas where food is processed
All materials are approved for use ...
Quality standard ISO 9001
Performance data according to Eurovent
TÜV HACCP-certified: suitable for use in food preparation and processing
Outflow direction: horizontal (suction)
HACCP hygiene certificate
Especially suitable for areas where food is processed
All materials are approved for use with food
Easy to clean
Heat exchanger block
- Piping offset 50 x 25 mm in direction of air flow
- Core pipes made of copper, inner ribbing (R) Ø 12 mm
- Aluminium fins
- Fin spacing 4.0 or 7.0 mm
- End and middle sheets made from corrosion-resistant aluminium alloy AlMg3
- Pipe system cleaned, dried, filled with dry air to positive pressure of approx. 1 bar
- Optimised refrigerant distributor for even pressurisation in all lines
- Copper collecting pipe
- Schrader valve on outlet
- Copper solder connection pieces
Housing
- Self-supporting structure with sturdy brackets
- Housing made from AlMg
- Drip tray made from AlMg
- Powder-coated RAL 9003 bright white
- Smooth surfaces allow easy cleaning
Drip tray
- Separate drip plate, foldable
- Thermally decoupled tray (no condensation build-up)
- ¾" and 1¼” condensation drains
Fans
- Fans for high energy efficiency
- with 2 speeds as standard (fan diameters from 500 mm)
- Thermal relays for motor protection
- Up to size 450: 230 V, 1~, 50 Hz or 60 Hz
- From size 500: 400 V, 3~, 50 Hz or 60 Hz
- Drive motor, fan blades and protective grille structure for optimal air flow
- Low noise and maintenance free drive motors
- Windings, thermal class F according to DIN EN 60 034-1
Alternating current motor(s) 230 V, 50 Hz
Drive motors with protection class IP 54
Application temperature range -30.0 °C to 40.0 °C
Three phase motor(s) 400 V, 50 Hz
Drive motors with protection class IP 54
Application temperature range -40.0 °C to 70.0 °C
Protective grille according to EN294
All axial fans are mounted such that they are easy to service
Thermal relays are integrating into the motor winding.
Accessories / Replacement parts
-
Ventilator motor