Hygrostats
Sauter hygrostat including flange HBC112-F001 15/95% r.h.
Icon. Image similar to product.
Order No.: 283.8204
Manufacturer number: HBC112-F001
Manufacturer: Sauter
More in this category: Hygrostats
One click to the most important information:
Description
If the relative humidity increases, then the contact switches from 1-2 to 1-3. If the set value xs is reached, then the second contact switches from 1-5 to 1-6. If the relative humidity drops by switching range xsh, then the contact switches back from 1-3 to 1-2. The switching range xsh can be ...
If the relative humidity increases, then the contact switches from 1-2 to 1-3. If the set value xs is reached, then the second contact switches from 1-5 to 1-6. If the relative humidity drops by switching range xsh, then the contact switches back from 1-3 to 1-2. The switching range xsh can be adjusted with the internal control using a screwdriver. Where the humidity changes rapidly, the switching point is temporarily moved.
Features
- For regulating and monitoring the relative humidity in ventilation ducts or rooms
- Suitable for humidifiers and dehumidifiers
- HBC 112 for 3-point control or min. and max. monitoring
- Lower part of the housing with sensor pipe
- Ø 30 mm, made from glass fibre reinforced thermoplast
- Housing cover made ...
- For regulating and monitoring the relative humidity in ventilation ducts or rooms
- Suitable for humidifiers and dehumidifiers
- HBC 112 for 3-point control or min. and max. monitoring
- Lower part of the housing with sensor pipe
- Ø 30 mm, made from glass fibre reinforced thermoplast
- Housing cover made from thermoplast, sealable
- Temperature compensated humidity sensor with stabilised plastic fibre ribbon
- Setpoint adjuster xs for upper switching point with scale
- Microswitch with single pole switch contact and fixed switching differential xsd
- HBC 112 with 2 microswitches and internal adjustable switching range xsh
- For installation in ventilation ducts or wall mounting
- Electrical connection to screw terminals max. 2x 1.5 mm2
- Attachment flange with seal for cable installation
- Cable inlet for Pg 11
Technical data
General information
Sensor
waagrecht IP32
Switch
2
Setpoint range
15 bis 95 %rh
Type
HBC 112 F001
permissible air velocity
10
m/s
Pressure
Range
6 bis 25 %rh
Electrical Data
Protection class
IP 30
(EN 60529)
Protection category
II
(EN 60536)
Supply voltage
230/1/50 V/Ph/Hz
Humidity
Humidity measurement range
15 bis 95 %rh
Temperature data
Switching differential
4 %rh
Temperature measuring range
max.
70 °C
min.
-50 °C
Ambient temperature without condensation
-30 bis +70 °C
Technical modifications reserved. Product images may differ from the actual product and are meant for demonstration purposes only. Absolutely no liability can be assumed for possible indication errors and errors in the manufacturers’ information.
Loading
