Danfoss 3-way electronic valve CTR 20 DN25 (027H7244)
Description
The CTR 20 is an electrically operated 3-way valve, specially developed for CO2 systems with heat recovery. By using a CTR valve, it is possible to supply heat recovery as well as the gas cooler (or condenser) according to the required output, even under strongly changing conditions. This is ...
The CTR 20 is an electrically operated 3-way valve, specially developed for CO2 systems with heat recovery. By using a CTR valve, it is possible to supply heat recovery as well as the gas cooler (or condenser) according to the required output, even under strongly changing conditions. This is made possible by the proportional stepper motor technology used. The typical application for CTR valves is a system in the food retail trade. According to the state of the art, this CTR 3-way valve is very often equipped with transcritical CO2 systems (incl. heat recovery). As a result, these systems are very energy efficient in most cases.
Features
• HP connections: 2 inputs and 1 output / 1 input and 2 outputs
• Position: On / off and proportional opening (both inputs open)
• Can be used with R744 (CO2)
• Max. operating pressure: 140 bar
• Temperature range: 0 to +150 °C
• Approved oils: PAG / POE
• MOPD: 3 bar
• ...
• HP connections: 2 inputs and 1 output / 1 input and 2 outputs
• Position: On / off and proportional opening (both inputs open)
• Can be used with R744 (CO2)
• Max. operating pressure: 140 bar
• Temperature range: 0 to +150 °C
• Approved oils: PAG / POE
• MOPD: 3 bar
• Protection rating: IP67
• Closing/opening time: 88 sec.
• Approvals: EN 10220
• Step speed (Controller): 75 steps / sec.
• Recommended controller: AK-XM 208C, EKD 316C, EKD 316
Technische Daten
• HD-Anschlüsse: 2 Eingänge und 1 Ausgang / 1 Eingang und 2 Ausgänge
• Position: Ein / Aus und proportionale Öffnung (beide Eingänge öffnen sich)
• Einsetzbar für R744 (CO2)
• Max. Betriebsdruck: 140 bar
• Temperaturbereich: 0 bis +150 °C
• Zulässige Öle: PAG / POE
• MOPD: 3 ...
• HD-Anschlüsse: 2 Eingänge und 1 Ausgang / 1 Eingang und 2 Ausgänge
• Position: Ein / Aus und proportionale Öffnung (beide Eingänge öffnen sich)
• Einsetzbar für R744 (CO2)
• Max. Betriebsdruck: 140 bar
• Temperaturbereich: 0 bis +150 °C
• Zulässige Öle: PAG / POE
• MOPD: 3 bar
• Schutzart: IP67
• Schließ- / Öffnungszeit: 88 sek.
• Zulassung: EN 10220
• Schrittgeschwindigkeit (Controller): 75 Schritte / sek.
• Empfohlen Controller: AK-XM 208C, EKD 316C, EKD 316
Accessories / Replacement parts
-
Connection cable
-
Display
-
Extension module
-
Superheating regulator
