Parker liquid separator VA32-5S 16mm

The VA liquid separator is designed to be installed in the suction line to prevent liquid hammering. The evaporating temperature must not be lower than -40 °C and the suction temperature in the liquid separator not be lower than -12 °C. In the case of lower temperatures, the separator must be heated in order to ensure the oil return flow. A selection should be made based on the data in the performance table and not based on the connections! Please note: Always mount the separator vertically. Inlet = INLET. The recommended maximum power is based on a pressure loss equal to 0.55 °C. The minimum power is based on the lowest flow volume that will still allow reliable oil return.

Kälteleistung bei Verdampfungstemperatur [°C], einstufiger Betrieb:

R134a:
+4: Max.: 6,7, Min.: 1,0
-6: Max.: 4,5, Min.: 0,7
-17: Max.: 2,8, Min.: 0,4
-28: Max.: 1,9, Min.: 0,3
-40: Max.: 1,2, Min.: 0,2

R507/R404A:
-6: Max.: 7,2, Min.: 1,1
-17: Max.: 4,4, Min.: 0,7
-29: Max.: 2,9, Min.: 0,4

R407C:
+4: Max.: 10,0, Min.: 1,5
-6: Max.: 6,4, Min.: 1,0
-17: Max.: 4,2, Min.: 0,6