- Produkte
- Refrigeration components
- Regulators
- Electronic
- Cooling controller
- Danfoss EKC 202D1 cooling controller | 230 V | without sensor | replaces EKC 201C | 084B8554
Danfoss EKC 202D1 cooling controller | 230 V | without sensor | replaces EKC 201C | 084B8554
More in this category: Cooling controller
One click to the most important information:
Description
This cooling controller is intended for regulating the temperature of refrigeration units in supermarkets.
Many predefined applications mean there are many options for using this regulator. Excellent flexibility in both the installation and servicing of refrigeration systems.
The regulator ...
?xml>This cooling controller is intended for regulating the temperature of refrigeration units in supermarkets.
Many predefined applications mean there are many options for using this regulator. Excellent flexibility in both the installation and servicing of refrigeration systems.
The regulator contains a temperature control function that can be fed with temperature values from one or two temperature sensors. The thermostat sensors are attached in the cold air stream after the evaporator (S4), in the return stream immediately before the evaporator (S3) or in both locations. The settings determine what effect these signals should have over the regulation of the system.
The defrosting temperature can be read directly from the regulator (signal from defrost sensor (S5) or indirectly via the air outlet temperature (S4)).
Four relays switch between functions — depending on the selected applications. The following options are available:
- Cooling (compressor or solenoid valve)
- Fan
- Defrost
- Frame heating
- Alarm
- Light
Features
- Several pre-programmed applications
- Keys and seals moulded into the front panel. (EKC 202)
- Data communication via optional plug-in card
- Fixed MODBUS data communication on the DIN model, LON RS 485 can be added later
- Two target temperature valves
- Digital inputs for various functions
- Real-time clock ...
- Several pre-programmed applications
- Keys and seals moulded into the front panel. (EKC 202)
- Data communication via optional plug-in card
- Fixed MODBUS data communication on the DIN model, LON RS 485 can be added later
- Two target temperature valves
- Digital inputs for various functions
- Real-time clock with power reserve
Accessories / Replacement parts
-
Accessories
-
Probe / sensor
Technical data
Detailed technical data can be found in the operating manual under downloads!