EBM fan motor IQ3620 230V 55330.01150
Description
Huge energy saving potential can be particularly found in applications where fans must operate for long periods of time, e.g. refrigerated counters, bottle coolers and underfloor convectors. The iQ motors from ebm-papst are a particular good option in such cases: Thanks to GreenTech EC ...
Huge energy saving potential can be particularly found in applications where fans must operate for long periods of time, e.g. refrigerated counters, bottle coolers and underfloor convectors. The iQ motors from ebm-papst are a particular good option in such cases: Thanks to GreenTech EC technology, energy savings of up to 70% can be achieved with the same or better effectiveness compared to existing split phase motors.
Features
- Material: Cast aluminium housing
- Flow direction: blow or suction (depending on propeller blades used
- Rotation: counter-clockwise as viewed from the end of the shaft
- Protection class: IP54
- Insulation class: “H”
- Installation position: Any
- Type of operation: Continuous operation (S1)
- Bearings: ...
- Material: Cast aluminium housing
- Flow direction: blow or suction (depending on propeller blades used
- Rotation: counter-clockwise as viewed from the end of the shaft
- Protection class: IP54
- Insulation class: “H”
- Installation position: Any
- Type of operation: Continuous operation (S1)
- Bearings: Maintenance-free ball bearings
- Motor protection: Electronic
- Electrical connection: Mains cable
- Protection category: I
- Certifications: UL, TÜV according to DIN EN 60335-2-24, DIN EN 60335-2-89, DIN EN 60075-15,
- Accessory installation: Protective grille and wall ring are attached to the protruding threaded end pieces on the A side.
- Propeller attachment: Attachment to the motor shaft uses a plastic adapter pieces with drive pins and an M4 screw
Merkmale
Material: Aluminium-Druckguss-Gehäuse
Förderrichtung: blasend oder saugend (je nach verwendetem Axialfl ügelrad)
Drehrichtung: links auf das Wellenende gesehen
Schutzart: IP54
Isolationsklasse: „H“
Einbaulage: beliebig
Betriebsart: Dauerbetrieb (S1)
Lagerung: wartungsfreie Kugellager
Material: Aluminium-Druckguss-Gehäuse
Förderrichtung: blasend oder saugend (je nach verwendetem Axialfl ügelrad)
Drehrichtung: links auf das Wellenende gesehen
Schutzart: IP54
Isolationsklasse: „H“
Einbaulage: beliebig
Betriebsart: Dauerbetrieb (S1)
Lagerung: wartungsfreie Kugellager
Motorschutz: durch Elektronik
Elektrischer Anschluß: Netzkabel
Schutzklasse: I
Zulassungen: UL, TÜV nach DIN EN 60335-2-24, DIN EN 60335-2-89, DIN EN 60075-15,
Montage Anbauteile: Schutzgitter und Wandring werden auf die überstehenden Gewindeenden der A-Seite befestigt
Befestigung Axialflügelrad: Die Befestigung auf der Motorwelle erfolgt durch einen Kunststoffadapter mit Mitnahmezapfen und einer Schraube M4
Accessories / Replacement parts
-
Mounting foot
Technical data
*) Depending on the back pressure, the rated speed of 1300 min-1 may not always be achieved. Depending on installation location, a speed of approx. 1200 min-1 (+/- 100 min-1) will be reached. Even in such cases, the intelligent electronics will guarantee there are no interruptions to (continuous) operation.