- Produkte
- Refrigerants, oils & brines
- Cooling brines
- Heat transfer fluids
- N - ethylene glycol
- Antifrogen N (disposable canister) filling quantity 60kg
Antifrogen N (disposable canister) filling quantity 60kg
More in this category: N - ethylene glycol
One click to the most important information:
Description
Antifrogen® products are versatile heat and cold transfer fluids based on glycols (Antifrogen N, Antifrogen L and Antifrogen SOL HT) or potassium formate (Antifrogen KF). All types comply with the specifications of ÖNORM H5195, provide reliable frost protection and permanently protect your ...
Antifrogen® products are versatile heat and cold transfer fluids based on glycols (Antifrogen N, Antifrogen L and Antifrogen SOL HT) or potassium formate (Antifrogen KF). All types comply with the specifications of ÖNORM H5195, provide reliable frost protection and permanently protect your cooling and heating systems against corrosion. The frost resistance depends on the mixing ratio with water. The water used for dilution should not contain more than 100 mg/kg (ppm) chloride. The water hardness can be in a wide range between 0 and 25° dH. This means that drinking water can be used in addition to fully demineralized (deionized, distilled) water. Antifrogen contains CMR-free corrosion inhibitors that permanently protect the metals of the cooling and heating systems from corrosion, even in mixed installations, and prevent scale deposition. Galvanized piping should be avoided if possible, as all glycol-water mixtures can dissolve zinc.
Features
- Antifrogen® N is a light yellow colored, clear liquid
- Based on monoethylene glycol plus corrosion protection additives (nitrite-, amine-, borate- and phosphate-free)
- Minimum application concentration: 20 % by volume
- Continuous use range from -35 to +150 °C (hot water ...
- Antifrogen® N is a light yellow colored, clear liquid
- Based on monoethylene glycol plus corrosion protection additives (nitrite-, amine-, borate- and phosphate-free)
- Minimum application concentration: 20 % by volume
- Continuous use range from -35 to +150 °C (hot water heating systems, technical cooling systems, heat pump systems)
Accessories / Replacement parts
-
Tester