Euro Line power rack set version 2 EV3E-NJ6226ZX R134a with condenser
More in this category: Euro Line-Embraco
One click to the most important information:
Description
Schiessl Euroline power racks operate with 3 or 4 fully hermetic Embraco compressors with the same cooling power. To control the power rack, a power rack controller is used in combination with a pressure transmitter.
The pressure transmitter is mounted on the intake side and records the actual ...
Schiessl Euroline power racks operate with 3 or 4 fully hermetic Embraco compressors with the same cooling power. To control the power rack, a power rack controller is used in combination with a pressure transmitter.
The pressure transmitter is mounted on the intake side and records the actual intake pressure value. The power rack controller regulates the cooling power of the rack so that the target intake pressure is achieved as closely as possible. All components are mounted to a tough riveted steel profile frame. All parts of the frame are coated and painted. The power rack comes with appropriate shock mounts. A spirit level must be used when setting up the system to ensure it is exactly horizontal. Power racks are available with or without a condenser. The switch cabinet with rack controller is pre-assembled as standard. Oil supply to the compressors is provided by a carefully designed common suction pipe. The compressors are also fitted with an oil equalisation line.
Features
- optimally adapts compressor performance to changing loads on the refrigeration system
- low minimum cooling power
- optimal temperature and quality for refrigerated goods
- minimal space needed due to compact design
- energy saving from better performance control in optimal evaporating temperatures
- easy to ...
- optimally adapts compressor performance to changing loads on the refrigeration system
- low minimum cooling power
- optimal temperature and quality for refrigerated goods
- minimal space needed due to compact design
- energy saving from better performance control in optimal evaporating temperatures
- easy to replace compressors make it is easy to service
Scope of delivery
- 3 or 4 fully hermetic Embraco piston compressors
- Crankcase heater
- Shut-off valves in the compressor intake lines
- Check valves in the pressure lines of each compressor
- Additional fan (for versions without a condenser installed)
- High pressure monitor for each compressor, type tested
- Low pressure ...
- 3 or 4 fully hermetic Embraco piston compressors
- Crankcase heater
- Shut-off valves in the compressor intake lines
- Check valves in the pressure lines of each compressor
- Additional fan (for versions without a condenser installed)
- High pressure monitor for each compressor, type tested
- Low pressure monitor, type tested
- Oil/gas equalisation line between compressors with inspection glass
- Pressure absorber -0.5 - 7 bar
- Fluid collector
- Flange dryer/inspection glass
- Speed regulator (phase angle control) for versions with integrated condenser
Control box
- Voltage supply 400/3/50 Hz
- Compound controller Dixell XC650XC
- Motor protection switch per compressor
- Control switch Auto-0-Hand per compressor
- Collective fault (potential-free contact plus fault lamp)
Accessories / Replacement parts
-
Compressor
-
Filter insert loose
-
Intake pipe filter loose
-
Replacement condenser air-cooled
-
Replacement speed regulator
-
Replacement ventilator motor
Technical data
Betriebsbedingungen: Bei Modellen ohne Verflüssiger Kondensationstemperatur tc = + 45 °C, bei Modellen mit Verflüssiger tu = + 32°C