Rivacold ceiling block system TK SFL 016 P 001/C R290 230V

The SF series block systems consist of a compressor/condenser unit with control panel and generously proportioned evaporator. These are ceiling-mounted units with a very flat profile evaporator for making optimum use of the space within the cooling cell. They are a space-saving and simple to install solution.

• A self-supporting housing made from electro-galvanised steel with epoxy powder coating.
• The front of the housing is easy to open. This means that components are easy to access for inspection and maintenance;
• Hermetic compressor with thermal protection
• Cu/Alu finned heat exchanger for evaporator
• Expansion capillary tube up to size 54
• Air-cooled condensers
• Automatic defrosting with programmable intervals and duration
• Electronic control can also be customised
• Control panel set back
• Electronic controller
• High-pressure pressure control
• Remote control panel with 5 m connection cable
• Door contact switch with 2.5 m cable
• Cooling cell light with 2.5 m cable
• Evaporating tray for condensation water
• Door frame heating connection for LBP versions with 2.5 m cable
• Power supply cable (L = 2.5 m)
• Mounting kit and overflow pipe

The amount of R290 required for each circuit is less than 150 g, meaning that you will have no problems setting up the units!