AC&R oil collecting vessel S-9108U CE 11,4L
More in this category: Oil collecting vessels
One click to the most important information:
Description
The oil from the oil separator is degassed, cooled and stored in the oil reservoir.
Selection, installation:
The size of the oil reservoir depends on the number of compressors in the power rack and the theoretical
volume of the compressor.
The oil reservoir should be placed at the same height ...
The oil from the oil separator is degassed, cooled and stored in the oil reservoir.
Selection, installation:
The size of the oil reservoir depends on the number of compressors in the power rack and the theoretical
volume of the compressor.
The oil reservoir should be placed at the same height or geodetically higher than the oil level regulator. Each oil reservoir
must be fitted with a heating element to avoid refrigerant deposits from building up.
During commissioning, the reservoir must be filled to the upper inspection glass with compressor refrigeration machine oil. Top up the oil
only if the oil level falls below the lower inspection glass.
Features
Oil reservoir with 2 inspection glasses
Valve and pressure equalisation connection on the top of the reservoir
Valve on base to supply the oil level regulators
Accessories / Replacement parts
-
Check valve
-
Ölfilter
Technical data
V1 = volume capacity from base of the reservoir to the first inspection glass
V2 = volume capacity from base of the reservoir to the second inspection glass