Nozzle inserts
Alco orifice insert f. T and L X11873-B4B
Icon. Image similar to product.
Order No.: 213.0209
Manufacturer number: 803348
Manufacturer: Alco
More in this category: Nozzle inserts
One click to the most important information:
Features
- Modular principles for simple assembly, excellent serviceability and low stock levels
- Large membrane areas generate large control forces for reducing disruptive influences
- High-quality materials and a special production methods ensure a long service life
- Outstanding partial load behaviour using a ...
- Modular principles for simple assembly, excellent serviceability and low stock levels
- Large membrane areas generate large control forces for reducing disruptive influences
- High-quality materials and a special production methods ensure a long service life
- Outstanding partial load behaviour using a double-seated design for the valve inserts (TJRE, TERE, TIRE and THRE)
- Can be used in either direction of flow, e.g. for heat pumps
- Capillary pipe length of 1.5 m (TCLE, TJRE), 3 m (TERE, TIRE and THRE)
- Solder connection on outlet, flanged 7/16” UNF connection for pressure equalisation
- Approved for operating pressure: 46 bar (XB ... ), 31 bar (XC ... )
- Max. sensor temperature: 75 °C without MOP, 175 °C with MOP
- Sensor filling: Without MOP: Fluid filling; With MOP: Gas filling
- No CE mark according to Pressure Equipment Directive 2014/68/EU
Gerätebeschreibung
Die Nennleistungen beziehen sich auf eine Verdampfungs-Temperatur von + 4°C Taupunkt und eine Kondensations-Temperatur +38°C Siedepunkt / +43°C Taupunkt, sowie eine Flüssigkeitsunterkühlung von 1 K am Ventileintritt. Für andere Betriebsbedingungen siehe Korrektur-Faktoren Seite 21.
Accessories / Replacement parts
-
Standard flange
-
Upper section
Technical data
General information
Seat
Doppelsitz
für Baureihe
TJRE 11MW, TJRE 14HW, TJRE 14NW, TJRE 12SW, LJRE 1
Performance data
Nominal capacity
45 kW
refrigerant=R 134A
62 kW
refrigerant=R 407C
40 kW
refrigerant=R 404A
40 kW
refrigerant=R 507A
67.7 kW
refrigerant=R 410A
The rated powers are based on an evaporation temperature of + 4 °C dew point and a condensation temperature of +38 °C flash point / +43 °C dew point as well as a fluid supercooling of 1 K at the valve inlet. For other operating conditions, please consult the correction factors on page 21.
Technical modifications reserved. Product images may differ from the actual product and are meant for demonstration purposes only. Absolutely no liability can be assumed for possible indication errors and errors in the manufacturers’ information.
Customers also bought...
Loading