Parker liquid separator VA59-11SRD 35mm

The VA liquid separator is designed to be installed in the suction line to prevent liquid hammering. The evaporating temperature must not be lower than -40 °C and the suction temperature in the liquid separator not be lower than -12 °C. In the case of lower temperatures, the separator must be heated in order to ensure the oil return flow. A selection should be made based on the data in the performance table and not based on the connections! Please note: Always mount the separator vertically. Inlet = INLET. The recommended maximum power is based on a pressure loss equal to 0.55 °C. The minimum power is based on the lowest flow volume that will still allow reliable oil return.

Kälteleistung bei Verdampfungstemperatur [°C], einstufiger Betrieb:

R134a:
+4: Max.: 42,1, Min.: 6,3
-6: Max.: 28,2, Min.: 4,2
-17: Max.: 17,3, Min.: 2,6
-28: Max.: 11,8, Min.: 1,8
-40: Max.: 7,6, Min.: 1,1

R507/R404A:
-6: Max.: 45,2, Min.: 6,8
-17: Max.: 27,6, Min.: 4,1
-29: Max.: 18,3, Min.: 2,7

R407C:
+4: Max.: 62,7, Min.: 9,4
-6: Max.: 39,9, Min.: 6,0
-17: Max.: 26,4, Min.: 4,0